CIDR IP Block b16 NHI -- 0.0.0.0/26 0x00000000 0 0.0.0.16/29 0x00000010 0 0/0 0.0.0.16/30 0x00000010 0:0(2) 0:1(0) 1 0.0.0.8/29 0x00000008 1 1/0 0.0.0.8/30 0x00000008 1:0(2) 1:1(0) 2 0.0.0.0/29 0x00000000 2 2/0 0.0.0.0/30 0x00000000 2:0(2) 2:1(0) 3 0.0.0.32/30 0x00000020 0:0(0) 1:0(0) 4 0.0.0.28/30 0x0000001c 0:0(1) 2:0(0) 5 0.0.0.24/30 0x00000018 1:0(1) 2:0(1) NHI Addr CIDR Level IP Address Block % util -- -- 0.0.0.0/26 59.375 0 0 0.0.0.16/29 75.0 1 1 0.0.0.8/29 75.0 2 2 0.0.0.0/29 75.0 ** Using specified 1000.0ns clock resolution --- Phase I: construct table of routers and hosts --- Phase II: connect Point-To-Point links --- Phase III: add static routes ## Net config: 6 routers and hosts ## Elapsed time: 0.198 seconds ** Running for 10000000 clock ticks (== 10.0 seconds sim time) ---------------------------------------------------------------------- | Raceway SSF 1.0b06 (26 June 2000) | Proprietary Internal Development Release | (c)2000 Renesys Corporation ---------------------------------------------------------------------- 0.0 bgp@0:0 AS 3 id 0.0.0.17/32 prefix 0.0.0.16/29 0.0 bgp@0:0 adding 0.0.0.16/29 (DoP = 100) to local route table 0.0 bgp@1:0 AS 2 id 0.0.0.9/32 prefix 0.0.0.8/29 0.0 bgp@1:0 adding 0.0.0.8/29 (DoP = 100) to local route table 0.0 bgp@2:0 AS 1 id 0.0.0.1/32 prefix 0.0.0.0/29 0.0 bgp@2:0 adding 0.0.0.0/29 (DoP = 100) to local route table 5.52E-4 bgp@2:0 executing Decision Process Phase 3 5.52E-4 bgp@2:0 building outgoing RIBs 5.52E-4 bgp@2:0 adding 0.0.0.0/29 to outgoing RIB for bgp@0:0 [CFRI] 5.52E-4 bgp@2:0 adding 0.0.0.0/29 to outgoing route table for peer 0 5.52E-4 bgp@2:0 adding 0.0.0.0/29 to outgoing RIB for bgp@1:0 [CFRI] 5.52E-4 bgp@2:0 adding 0.0.0.0/29 to outgoing route table for peer 1 5.52E-4 bgp@2:0 snd update advertising my AS to bgp@1:0 rte=0.0.0.0/29 5.52E-4 bgp@1:0 executing Decision Process Phase 3 5.52E-4 bgp@1:0 building outgoing RIBs 5.52E-4 bgp@1:0 adding 0.0.0.8/29 to outgoing RIB for bgp@0:0 [CFRI] 5.52E-4 bgp@1:0 adding 0.0.0.8/29 to outgoing route table for peer 0 5.52E-4 bgp@1:0 adding 0.0.0.8/29 to outgoing RIB for bgp@2:0 [CFRI] 5.52E-4 bgp@1:0 adding 0.0.0.8/29 to outgoing route table for peer 1 5.52E-4 bgp@1:0 snd update advertising my AS to bgp@2:0 rte=0.0.0.8/29 5.52E-4 bgp@1:0 executing Decision Process Phase 3 5.52E-4 bgp@1:0 building outgoing RIBs 5.52E-4 bgp@1:0 skip rte to 0.0.0.8/29 (already put in RIB-Out for bgp@0:0) 5.52E-4 bgp@1:0 skip rte to 0.0.0.8/29 (already put in RIB-Out for bgp@2:0) 5.52E-4 bgp@1:0 snd update advertising my AS to bgp@0:0 rte=0.0.0.8/29 5.52E-4 bgp@0:0 executing Decision Process Phase 3 5.52E-4 bgp@0:0 building outgoing RIBs 5.52E-4 bgp@0:0 adding 0.0.0.16/29 to outgoing RIB for bgp@1:0 [CFRI] 5.52E-4 bgp@0:0 adding 0.0.0.16/29 to outgoing route table for peer 0 5.52E-4 bgp@0:0 adding 0.0.0.16/29 to outgoing RIB for bgp@2:0 [CFRI] 5.52E-4 bgp@0:0 adding 0.0.0.16/29 to outgoing route table for peer 1 5.52E-4 bgp@0:0 snd update advertising my AS to bgp@1:0 rte=0.0.0.16/29 5.52E-4 bgp@2:0 executing Decision Process Phase 3 5.52E-4 bgp@2:0 building outgoing RIBs 5.52E-4 bgp@2:0 skip rte to 0.0.0.0/29 (already put in RIB-Out for bgp@0:0) 5.52E-4 bgp@2:0 skip rte to 0.0.0.0/29 (already put in RIB-Out for bgp@1:0) 5.52E-4 bgp@2:0 snd update advertising my AS to bgp@0:0 rte=0.0.0.0/29 5.52E-4 bgp@0:0 executing Decision Process Phase 3 5.52E-4 bgp@0:0 building outgoing RIBs 5.52E-4 bgp@0:0 skip rte to 0.0.0.16/29 (already put in RIB-Out for bgp@1:0) 5.52E-4 bgp@0:0 skip rte to 0.0.0.16/29 (already put in RIB-Out for bgp@2:0) 5.52E-4 bgp@0:0 snd update advertising my AS to bgp@2:0 rte=0.0.0.16/29 6.83E-4 bgp@2:0 rcv update frm bgp@1:0 rte=0.0.0.8/29 6.83E-4 bgp@2:0 adding 0.0.0.8/29 to incoming routes table (from bgp@1:0) 6.83E-4 bgp@2:0 executing Decision Process Phase 1 6.83E-4 bgp@2:0 degree of preference for 0.0.0.8/29 calculated to be 99 6.83E-4 bgp@2:0 executing Decision Process Phase 2 6.83E-4 bgp@2:0 selecting routes to install from bgp@0:0 6.83E-4 bgp@2:0 selecting routes to install from bgp@1:0 6.83E-4 bgp@2:0 adding 0.0.0.8/29 (DoP = 99) to local route table [CBRI] 6.83E-4 bgp@2:0 adding 0.0.0.8/29 (DoP = 99) to local route table 6.83E-4 bgp@2:0 executing Decision Process Phase 3 6.83E-4 bgp@2:0 building outgoing RIBs 6.83E-4 bgp@2:0 skip rte to 0.0.0.0/29 (already put in RIB-Out for bgp@0:0) 6.83E-4 bgp@2:0 skip rte to 0.0.0.0/29 (already put in RIB-Out for bgp@1:0) 6.83E-4 bgp@2:0 adding 0.0.0.8/29 to outgoing RIB for bgp@0:0 [CFRI] 6.83E-4 bgp@2:0 adding 0.0.0.8/29 to outgoing route table for peer 0 6.83E-4 bgp@2:0 skip rte to 0.0.0.8/29 (was received from bgp@1:0) 6.83E-4 bgp@2:0 snd update to bgp@0:0 rte=0.0.0.8/29 6.83E-4 bgp@0:0 rcv update frm bgp@1:0 rte=0.0.0.8/29 6.83E-4 bgp@0:0 adding 0.0.0.8/29 to incoming routes table (from bgp@1:0) 6.83E-4 bgp@0:0 executing Decision Process Phase 1 6.83E-4 bgp@0:0 degree of preference for 0.0.0.8/29 calculated to be 99 6.83E-4 bgp@0:0 executing Decision Process Phase 2 6.83E-4 bgp@0:0 selecting routes to install from bgp@1:0 6.83E-4 bgp@0:0 adding 0.0.0.8/29 (DoP = 99) to local route table [CBRI] 6.83E-4 bgp@0:0 adding 0.0.0.8/29 (DoP = 99) to local route table 6.83E-4 bgp@0:0 selecting routes to install from bgp@2:0 6.83E-4 bgp@0:0 executing Decision Process Phase 3 6.83E-4 bgp@0:0 building outgoing RIBs 6.83E-4 bgp@0:0 skip rte to 0.0.0.8/29 (was received from bgp@1:0) 6.83E-4 bgp@0:0 adding 0.0.0.8/29 to outgoing RIB for bgp@2:0 [CFRI] 6.83E-4 bgp@0:0 adding 0.0.0.8/29 to outgoing route table for peer 1 6.83E-4 bgp@0:0 skip rte to 0.0.0.16/29 (already put in RIB-Out for bgp@1:0) 6.83E-4 bgp@0:0 skip rte to 0.0.0.16/29 (already put in RIB-Out for bgp@2:0) 6.83E-4 bgp@0:0 snd update to bgp@2:0 rte=0.0.0.8/29 6.83E-4 bgp@1:0 rcv update frm bgp@0:0 rte=0.0.0.16/29 6.83E-4 bgp@1:0 adding 0.0.0.16/29 to incoming routes table (from bgp@0:0) 6.83E-4 bgp@1:0 executing Decision Process Phase 1 6.83E-4 bgp@1:0 degree of preference for 0.0.0.16/29 calculated to be 99 6.83E-4 bgp@1:0 executing Decision Process Phase 2 6.83E-4 bgp@1:0 selecting routes to install from bgp@0:0 6.83E-4 bgp@1:0 adding 0.0.0.16/29 (DoP = 99) to local route table [CBRI] 6.83E-4 bgp@1:0 adding 0.0.0.16/29 (DoP = 99) to local route table 6.83E-4 bgp@1:0 selecting routes to install from bgp@2:0 6.83E-4 bgp@1:0 executing Decision Process Phase 3 6.83E-4 bgp@1:0 building outgoing RIBs 6.83E-4 bgp@1:0 skip rte to 0.0.0.8/29 (already put in RIB-Out for bgp@0:0) 6.83E-4 bgp@1:0 skip rte to 0.0.0.8/29 (already put in RIB-Out for bgp@2:0) 6.83E-4 bgp@1:0 skip rte to 0.0.0.16/29 (was received from bgp@0:0) 6.83E-4 bgp@1:0 adding 0.0.0.16/29 to outgoing RIB for bgp@2:0 [CFRI] 6.83E-4 bgp@1:0 adding 0.0.0.16/29 to outgoing route table for peer 1 6.83E-4 bgp@1:0 snd update to bgp@2:0 rte=0.0.0.16/29 6.83E-4 bgp@0:0 rcv update frm bgp@2:0 rte=0.0.0.0/29 6.83E-4 bgp@0:0 adding 0.0.0.0/29 to incoming routes table (from bgp@2:0) 6.83E-4 bgp@0:0 executing Decision Process Phase 1 6.83E-4 bgp@0:0 degree of preference for 0.0.0.0/29 calculated to be 99 6.83E-4 bgp@0:0 executing Decision Process Phase 2 6.83E-4 bgp@0:0 selecting routes to install from bgp@1:0 6.83E-4 bgp@0:0 passing over route to 0.0.0.8/29 (identical to current one) 6.83E-4 bgp@0:0 selecting routes to install from bgp@2:0 6.83E-4 bgp@0:0 adding 0.0.0.0/29 (DoP = 99) to local route table [CBRI] 6.83E-4 bgp@0:0 adding 0.0.0.0/29 (DoP = 99) to local route table 6.83E-4 bgp@0:0 executing Decision Process Phase 3 6.83E-4 bgp@0:0 building outgoing RIBs 6.83E-4 bgp@0:0 adding 0.0.0.0/29 to outgoing RIB for bgp@1:0 [CFRI] 6.83E-4 bgp@0:0 adding 0.0.0.0/29 to outgoing route table for peer 0 6.83E-4 bgp@0:0 skip rte to 0.0.0.0/29 (was received from bgp@2:0) 6.83E-4 bgp@0:0 skip rte to 0.0.0.8/29 (was received from bgp@1:0) 6.83E-4 bgp@0:0 skip rte to 0.0.0.8/29 (already put in RIB-Out for bgp@2:0) 6.83E-4 bgp@0:0 skip rte to 0.0.0.16/29 (already put in RIB-Out for bgp@1:0) 6.83E-4 bgp@0:0 skip rte to 0.0.0.16/29 (already put in RIB-Out for bgp@2:0) 6.83E-4 bgp@0:0 snd update to bgp@1:0 rte=0.0.0.0/29 6.83E-4 bgp@2:0 rcv update frm bgp@0:0 rte=0.0.0.16/29 6.83E-4 bgp@2:0 adding 0.0.0.16/29 to incoming routes table (from bgp@0:0) 6.83E-4 bgp@2:0 executing Decision Process Phase 1 6.83E-4 bgp@2:0 degree of preference for 0.0.0.16/29 calculated to be 99 6.83E-4 bgp@2:0 executing Decision Process Phase 2 6.83E-4 bgp@2:0 selecting routes to install from bgp@0:0 6.83E-4 bgp@2:0 adding 0.0.0.16/29 (DoP = 99) to local route table [CBRI] 6.83E-4 bgp@2:0 adding 0.0.0.16/29 (DoP = 99) to local route table 6.83E-4 bgp@2:0 selecting routes to install from bgp@1:0 6.83E-4 bgp@2:0 passing over route to 0.0.0.8/29 (identical to current one) 6.83E-4 bgp@2:0 executing Decision Process Phase 3 6.83E-4 bgp@2:0 building outgoing RIBs 6.83E-4 bgp@2:0 skip rte to 0.0.0.0/29 (already put in RIB-Out for bgp@0:0) 6.83E-4 bgp@2:0 skip rte to 0.0.0.0/29 (already put in RIB-Out for bgp@1:0) 6.83E-4 bgp@2:0 skip rte to 0.0.0.8/29 (already put in RIB-Out for bgp@0:0) 6.83E-4 bgp@2:0 skip rte to 0.0.0.8/29 (was received from bgp@1:0) 6.83E-4 bgp@2:0 skip rte to 0.0.0.16/29 (was received from bgp@0:0) 6.83E-4 bgp@2:0 adding 0.0.0.16/29 to outgoing RIB for bgp@1:0 [CFRI] 6.83E-4 bgp@2:0 adding 0.0.0.16/29 to outgoing route table for peer 1 6.83E-4 bgp@2:0 snd update to bgp@1:0 rte=0.0.0.16/29 6.83E-4 bgp@1:0 rcv update frm bgp@2:0 rte=0.0.0.0/29 6.83E-4 bgp@1:0 adding 0.0.0.0/29 to incoming routes table (from bgp@2:0) 6.83E-4 bgp@1:0 executing Decision Process Phase 1 6.83E-4 bgp@1:0 degree of preference for 0.0.0.0/29 calculated to be 99 6.83E-4 bgp@1:0 executing Decision Process Phase 2 6.83E-4 bgp@1:0 selecting routes to install from bgp@0:0 6.83E-4 bgp@1:0 passing over route to 0.0.0.16/29 (identical to current one) 6.83E-4 bgp@1:0 selecting routes to install from bgp@2:0 6.83E-4 bgp@1:0 adding 0.0.0.0/29 (DoP = 99) to local route table [CBRI] 6.83E-4 bgp@1:0 adding 0.0.0.0/29 (DoP = 99) to local route table 6.83E-4 bgp@1:0 executing Decision Process Phase 3 6.83E-4 bgp@1:0 building outgoing RIBs 6.83E-4 bgp@1:0 adding 0.0.0.0/29 to outgoing RIB for bgp@0:0 [CFRI] 6.83E-4 bgp@1:0 adding 0.0.0.0/29 to outgoing route table for peer 0 6.83E-4 bgp@1:0 skip rte to 0.0.0.0/29 (was received from bgp@2:0) 6.83E-4 bgp@1:0 skip rte to 0.0.0.8/29 (already put in RIB-Out for bgp@0:0) 6.83E-4 bgp@1:0 skip rte to 0.0.0.8/29 (already put in RIB-Out for bgp@2:0) 6.83E-4 bgp@1:0 skip rte to 0.0.0.16/29 (was received from bgp@0:0) 6.83E-4 bgp@1:0 skip rte to 0.0.0.16/29 (already put in RIB-Out for bgp@2:0) 6.83E-4 bgp@1:0 snd update to bgp@0:0 rte=0.0.0.0/29 8.14E-4 bgp@0:0 rcv update frm bgp@2:0 rte=0.0.0.8/29 8.14E-4 bgp@0:0 adding 0.0.0.8/29 to incoming routes table (from bgp@2:0) 8.14E-4 bgp@0:0 executing Decision Process Phase 1 8.14E-4 bgp@0:0 degree of preference for 0.0.0.8/29 calculated to be 98 8.14E-4 bgp@0:0 executing Decision Process Phase 2 8.14E-4 bgp@0:0 selecting routes to install from bgp@1:0 8.14E-4 bgp@0:0 passing over route to 0.0.0.8/29 (identical to current one) 8.14E-4 bgp@0:0 selecting routes to install from bgp@2:0 8.14E-4 bgp@0:0 passing over route to 0.0.0.0/29 (identical to current one) 8.14E-4 bgp@0:0 passing over route to 0.0.0.8/29 (DoP not better (98)) 8.14E-4 bgp@0:0 executing Decision Process Phase 3 8.14E-4 bgp@0:0 building outgoing RIBs 8.14E-4 bgp@0:0 skip rte to 0.0.0.0/29 (already put in RIB-Out for bgp@1:0) 8.14E-4 bgp@0:0 skip rte to 0.0.0.0/29 (was received from bgp@2:0) 8.14E-4 bgp@0:0 skip rte to 0.0.0.8/29 (was received from bgp@1:0) 8.14E-4 bgp@0:0 skip rte to 0.0.0.8/29 (already put in RIB-Out for bgp@2:0) 8.14E-4 bgp@0:0 skip rte to 0.0.0.16/29 (already put in RIB-Out for bgp@1:0) 8.14E-4 bgp@0:0 skip rte to 0.0.0.16/29 (already put in RIB-Out for bgp@2:0) 8.14E-4 bgp@2:0 rcv update frm bgp@0:0 rte=0.0.0.8/29 8.14E-4 bgp@2:0 adding 0.0.0.8/29 to incoming routes table (from bgp@0:0) 8.14E-4 bgp@2:0 executing Decision Process Phase 1 8.14E-4 bgp@2:0 degree of preference for 0.0.0.8/29 calculated to be 98 8.14E-4 bgp@2:0 executing Decision Process Phase 2 8.14E-4 bgp@2:0 selecting routes to install from bgp@0:0 8.14E-4 bgp@2:0 passing over route to 0.0.0.8/29 (DoP not better (98)) 8.14E-4 bgp@2:0 passing over route to 0.0.0.16/29 (identical to current one) 8.14E-4 bgp@2:0 selecting routes to install from bgp@1:0 8.14E-4 bgp@2:0 passing over route to 0.0.0.8/29 (identical to current one) 8.14E-4 bgp@2:0 executing Decision Process Phase 3 8.14E-4 bgp@2:0 building outgoing RIBs 8.14E-4 bgp@2:0 skip rte to 0.0.0.0/29 (already put in RIB-Out for bgp@0:0) 8.14E-4 bgp@2:0 skip rte to 0.0.0.0/29 (already put in RIB-Out for bgp@1:0) 8.14E-4 bgp@2:0 skip rte to 0.0.0.8/29 (already put in RIB-Out for bgp@0:0) 8.14E-4 bgp@2:0 skip rte to 0.0.0.8/29 (was received from bgp@1:0) 8.14E-4 bgp@2:0 skip rte to 0.0.0.16/29 (was received from bgp@0:0) 8.14E-4 bgp@2:0 skip rte to 0.0.0.16/29 (already put in RIB-Out for bgp@1:0) 8.14E-4 bgp@2:0 rcv update frm bgp@1:0 rte=0.0.0.16/29 8.14E-4 bgp@2:0 adding 0.0.0.16/29 to incoming routes table (from bgp@1:0) 8.14E-4 bgp@2:0 executing Decision Process Phase 1 8.14E-4 bgp@2:0 degree of preference for 0.0.0.16/29 calculated to be 98 8.14E-4 bgp@2:0 executing Decision Process Phase 2 8.14E-4 bgp@2:0 selecting routes to install from bgp@0:0 8.14E-4 bgp@2:0 passing over route to 0.0.0.8/29 (DoP not better (98)) 8.14E-4 bgp@2:0 passing over route to 0.0.0.16/29 (identical to current one) 8.14E-4 bgp@2:0 selecting routes to install from bgp@1:0 8.14E-4 bgp@2:0 passing over route to 0.0.0.8/29 (identical to current one) 8.14E-4 bgp@2:0 passing over route to 0.0.0.16/29 (DoP not better (98)) 8.14E-4 bgp@2:0 executing Decision Process Phase 3 8.14E-4 bgp@2:0 building outgoing RIBs 8.14E-4 bgp@2:0 skip rte to 0.0.0.0/29 (already put in RIB-Out for bgp@0:0) 8.14E-4 bgp@2:0 skip rte to 0.0.0.0/29 (already put in RIB-Out for bgp@1:0) 8.14E-4 bgp@2:0 skip rte to 0.0.0.8/29 (already put in RIB-Out for bgp@0:0) 8.14E-4 bgp@2:0 skip rte to 0.0.0.8/29 (was received from bgp@1:0) 8.14E-4 bgp@2:0 skip rte to 0.0.0.16/29 (was received from bgp@0:0) 8.14E-4 bgp@2:0 skip rte to 0.0.0.16/29 (already put in RIB-Out for bgp@1:0) 8.44E-4 bgp@1:0 rcv update frm bgp@2:0 rte=0.0.0.16/29 8.44E-4 bgp@1:0 adding 0.0.0.16/29 to incoming routes table (from bgp@2:0) 8.44E-4 bgp@1:0 executing Decision Process Phase 1 8.44E-4 bgp@1:0 degree of preference for 0.0.0.16/29 calculated to be 98 8.44E-4 bgp@1:0 executing Decision Process Phase 2 8.44E-4 bgp@1:0 selecting routes to install from bgp@0:0 8.44E-4 bgp@1:0 passing over route to 0.0.0.16/29 (identical to current one) 8.44E-4 bgp@1:0 selecting routes to install from bgp@2:0 8.44E-4 bgp@1:0 passing over route to 0.0.0.0/29 (identical to current one) 8.44E-4 bgp@1:0 passing over route to 0.0.0.16/29 (DoP not better (98)) 8.44E-4 bgp@1:0 executing Decision Process Phase 3 8.44E-4 bgp@1:0 building outgoing RIBs 8.44E-4 bgp@1:0 skip rte to 0.0.0.0/29 (already put in RIB-Out for bgp@0:0) 8.44E-4 bgp@1:0 skip rte to 0.0.0.0/29 (was received from bgp@2:0) 8.44E-4 bgp@1:0 skip rte to 0.0.0.8/29 (already put in RIB-Out for bgp@0:0) 8.44E-4 bgp@1:0 skip rte to 0.0.0.8/29 (already put in RIB-Out for bgp@2:0) 8.44E-4 bgp@1:0 skip rte to 0.0.0.16/29 (was received from bgp@0:0) 8.44E-4 bgp@1:0 skip rte to 0.0.0.16/29 (already put in RIB-Out for bgp@2:0) 8.44E-4 bgp@0:0 rcv update frm bgp@1:0 rte=0.0.0.0/29 8.44E-4 bgp@0:0 adding 0.0.0.0/29 to incoming routes table (from bgp@1:0) 8.44E-4 bgp@0:0 executing Decision Process Phase 1 8.44E-4 bgp@0:0 degree of preference for 0.0.0.0/29 calculated to be 98 8.44E-4 bgp@0:0 executing Decision Process Phase 2 8.44E-4 bgp@0:0 selecting routes to install from bgp@1:0 8.44E-4 bgp@0:0 passing over route to 0.0.0.0/29 (DoP not better (98)) 8.44E-4 bgp@0:0 passing over route to 0.0.0.8/29 (identical to current one) 8.44E-4 bgp@0:0 selecting routes to install from bgp@2:0 8.44E-4 bgp@0:0 passing over route to 0.0.0.0/29 (identical to current one) 8.44E-4 bgp@0:0 passing over route to 0.0.0.8/29 (DoP not better (98)) 8.44E-4 bgp@0:0 executing Decision Process Phase 3 8.44E-4 bgp@0:0 building outgoing RIBs 8.44E-4 bgp@0:0 skip rte to 0.0.0.0/29 (already put in RIB-Out for bgp@1:0) 8.44E-4 bgp@0:0 skip rte to 0.0.0.0/29 (was received from bgp@2:0) 8.44E-4 bgp@0:0 skip rte to 0.0.0.8/29 (was received from bgp@1:0) 8.44E-4 bgp@0:0 skip rte to 0.0.0.8/29 (already put in RIB-Out for bgp@2:0) 8.44E-4 bgp@0:0 skip rte to 0.0.0.16/29 (already put in RIB-Out for bgp@1:0) 8.44E-4 bgp@0:0 skip rte to 0.0.0.16/29 (already put in RIB-Out for bgp@2:0) 8.44E-4 bgp@1:0 rcv update frm bgp@0:0 rte=0.0.0.0/29 8.44E-4 bgp@1:0 adding 0.0.0.0/29 to incoming routes table (from bgp@0:0) 8.44E-4 bgp@1:0 executing Decision Process Phase 1 8.44E-4 bgp@1:0 degree of preference for 0.0.0.0/29 calculated to be 98 8.44E-4 bgp@1:0 executing Decision Process Phase 2 8.44E-4 bgp@1:0 selecting routes to install from bgp@0:0 8.44E-4 bgp@1:0 passing over route to 0.0.0.0/29 (DoP not better (98)) 8.44E-4 bgp@1:0 passing over route to 0.0.0.16/29 (identical to current one) 8.44E-4 bgp@1:0 selecting routes to install from bgp@2:0 8.44E-4 bgp@1:0 passing over route to 0.0.0.0/29 (identical to current one) 8.44E-4 bgp@1:0 passing over route to 0.0.0.16/29 (DoP not better (98)) 8.44E-4 bgp@1:0 executing Decision Process Phase 3 8.44E-4 bgp@1:0 building outgoing RIBs 8.44E-4 bgp@1:0 skip rte to 0.0.0.0/29 (already put in RIB-Out for bgp@0:0) 8.44E-4 bgp@1:0 skip rte to 0.0.0.0/29 (was received from bgp@2:0) 8.44E-4 bgp@1:0 skip rte to 0.0.0.8/29 (already put in RIB-Out for bgp@0:0) 8.44E-4 bgp@1:0 skip rte to 0.0.0.8/29 (already put in RIB-Out for bgp@2:0) 8.44E-4 bgp@1:0 skip rte to 0.0.0.16/29 (was received from bgp@0:0) 8.44E-4 bgp@1:0 skip rte to 0.0.0.16/29 (already put in RIB-Out for bgp@2:0) ---------------------------------------------------------------------- | 1 timelines, 5 barriers, 138 events, 500 ms, 0 Kevt/s ----------------------------------------------------------------------